17³Ô¹ÏÍø

JSPD 0039 / Length: 42 hours

Learn the basics of electric, plumbing, drywall installation, tile and other types of flooring, windows, siding and door installation to improve your home. On the first night of class, instructor will advise about tools to bring for future classes. 

JSPD 0050 / Length: 15 hours

Looking to save money on home repairs? This course is geared toward homeowners who want to learn to do simple repairs on their own. Topics such as proper tool use, as well as replacing or repairing doors and doorknobs, lighting fixtures, faucets, drains, drywall and tile will be covered. Bring only safety glasses as all tools and materials will be provided.

JSPD 2950 / Length: 45 hours

This course presents the basic skills necessary to build furniture. Proper use of hand and power tools is covered. Wood joinery is covered along with different finishing techniques. Course topics include: wood selection; basic joint creation; clamping techniques; finishes; shop tools; shop drawings.

JSPD 0082 / Length: 45 hours

Presents basic skills needed to wire a residential establishment. This hands-on course emphasizes the proper application of materials, safety, and the understanding of the NEC code.

PDS 9005 / Length: 45 hours

This course assumes a basic working knowledge of HVACR systems. Students who plan to sit for a specific NATE exam can focus their study on the different texts available. Purchasing these books is recommended. This course is designed to give the student a cursory understanding of the various disciplines.

The course gives the student a cursory understanding of: Core Essentials, A/C Service and Heat Pump Service; Gas and Oil Furnace Service. The recommended texts listed can be purchased through the bookstore:
– Preparing for the NATE Exam – A/C and Heat Pumps – ISBN: 978-1-61607-117-2
– Preparing for the NATE Exam – Core Essentials – ISBN: 978-1-61607-116-5
– Preparing for the NATE Exam – Gas and Oil Heating – ISBN: 978-1-61607-164-6.

JSPD 4000 / Length: 2 hours

The College’s Division of Technical Education is one of a small number of schools in the nation approved by the EPA to offer a refrigerant technician certification program. The training manual is available through the college. It is strongly recommended that students read the manual before taking the exam. The exam is given in online format only and can be scheduled through the Testing Center – call 610-325-2776.

JSPD 0063 / Length: 45 Hours

This course is an introduction to piping principles and practices as they apply to Heating, Ventilating, Air Conditioning, and Plumbing. The course utilizes a variety of pipes, pipe materials, and fittings in the instruction of proper method of joining pipe and material lists, measuring, and assembly of manifolds. The students will develop the skills needed to work with drawings and testing procedures.

JSPD 0057 / Length: 30 hours

Fundamentals of small displacement 2- and 4-cycle engines. Learn to maintain and repair gasoline engines on snow blowers, chain saws, lawn mowers, weed eaters and more. 

JSPD 2721 / Length: 45 hours

Hands-on practical application of residential plumbing will cover the basics of piping, valves, troubleshooting and home plumbing maintenance. Upon successful completion of this certificate, students should be able to:
– Perform basic plumbing tasks such as diagnosing toilet and faucet issues
– Changing faucets and fixtures
– Performing preventative maintenance checks and services
– Demonstrate proper drain clearing procedures

PDS 2737 / Length: 40 hours

This course is designed to assist plumbing professionals in understanding codes and adjacent code provisions. It addresses various codes founded upon certain basic principles of environmental sanitation and safety through properly designed, acceptably installed, and adequately maintained plumbing systems will be addressed.
– Correct all plumbing violations.
– Size and design plumbing systems for residential and commercial buildings.
– Define various plumbing systems code.
– Change the direction of flow without restrictions regarding drainage fitting patterns.
– 17³Ô¹ÏÍø the standards to control all materials, systems, and equipment used in the construction, installation, alteration, repair, or replacement of plumbing or drainage systems or parts.
– Test joints and connections in the plumbing system requiring gas tight and watertight for the pressure required.
– 17³Ô¹ÏÍø the plumbing code regarding how fixtures shall be separately trapped by a water seal trap and placed as close as possible to the fixture outlet.
– Demonstrate the proper handling of liquid waste containing grease, flammable wastes and other ingredients harmful to the building drainage system. Confirm the requirements for plumbing fixtures for accessible use and their installation.

JSPD 0062 / Length: 60 hours

This course presents fundamentals in the understanding and use of basic construction drawings to determine methods and materials of light construction. Emphasis is placed on architectural symbols, use of scales, applied geometry and orthographic projection.

This class is an Emergency first-aid and accident prevention instruction for construction employees and managers. OSHA requirements are stressed in this course. Administrative aspects of recordkeeping requirements, rights and responsibilities, standards, safety program development and implementation are covered. Safety training includes identification and elimination of accident and health hazards, inspection techniques and administration of first-aid and CPR. Upon successful completion of this course, students should be able to:
• Earn OSHA 30 Certification
• Earn First Aid/CPR Certification